فروش دستگاه عیب یاب التراسونیک dakota - تهران

فروش دستگاه عیب یاب التراسونیک Dakota امريكا
مدلDFX-8
داراي يكسال گارانتي و 5 سال خدمات پس از فروش
General
Size: 8.5W x 6.5H x 2.5D in (216 x 165 x 70mm).
Weight: 4.5 lbs (2.04 kgs), with batteries.
Case: Extruded aluminum body with nickel plated
aluminum end caps (gasket sealed).
Display: Blanview sunlight readable QVGA TFT color
display (320 x 240 pixels). Viewable area 4.54 x 3.40
in (115.2 x 86.4 mm), or 5.7 in (144.78 mm) diagonal.
16 color pallete, multiple color options and variable
brightness.
Screen Refresh Rate: 60Hz.
Display Views: Flaw Detector: Full wave, +/- Rectified,
or RF. Thickness Gauge: Digits, +/- Rectified, RF, or
B-Scan.
Timing: Precision TCXO timing with single shot 100
MHz 8 bit ultra low power digitizer.
Measurement Gates: Two independent gates (Flaw),
and three gates (thickness). Start & width adjustable
over full range. Amplitude 5-95%, 1% steps. Positive
or negative triggering for each gate with audible and
visual alarms.
Operating Temperature: 14 to 140F (-10C to 60C).
Environmental: Meets IP65 requirements.
Pulser
Pulser Type: DFX-8 Two adjustable square wave pulsers.
DFX-8+ Two tone burst pulsers.
P.R.F.: 8 to 2000Hz in selectable steps (8, 16, 32, 66, 125,
250, 333, 1000, 2000 Hz).
Pulser Voltage: DFX-8 100 - 200 volt peak amplitude,
rise/fall time 10ns into 50ohm. DFX-8+ 100 - 400v.
Pulse Width: 40 to 400 ns. Selectable step options 40,
80 & 400 ns (labeled spike, thin & wide).
Receivers
Gain: 0 to 110dB with 0.2dB resolution. Manual and
AGC control.
Damping: 50, 75, 100, 300, 600, & 1500 ohms.
Frequency Bands: DFX-8 & DFX-8+ Broadband 1.8 - 19
MHz (-3dB). Four narrow bands at 1MHz, 2MHz, 5MHz,
10MHz. DFX-8+ Additional narrow bands at .5MHz,
15MHz.
Horizontal Linearity: +/- 0.4% FSW.
Vertical Linearity: +/- 1% FSH.
Amplifier Linearity: +/- 1 dB.
Amplitude Measurement: 0 to 100% FSH, with 1%
resolution.
Delay: 0 - 999in (25,375mm) at steel velocity.
Power Source
Lithium Ion Pack: 10.8v, 2 amp hrs, typical operation
18hrs.
Battery Backup: Emergency battery backup. Six 1.5V
alkaline, 1.2V AA Nicad cells, 1.2V AA NI-MH, or other
other equivalent power source. Battery life (continuous
use): Alkaline (12 hrs), Nicad (5hrs), and NI-MH (12hrs),
with default settings.
Connections
USB: Direct USB 1.1 PC connectivity.
Power Connector: 12v @ 2amps, adapter 100-240 VAC,
.7 Amps, 50-60 Hz.
5 Pin Lemo (includes):
RS232Output: RS232 PC serial interface. DFX-8+ For
use with B-Scan encoders (crawlers).
Alarm Outputs: Two independent alarm outputs triggered
by the gates.
Analog Out: DFX-8+ Proportional outputs (amplitude
or distance), 0-10 volts.
Transducer Connectors: Two LEMO 00 connectors.
Calibration
Automatic Calibration: Longitudinal (straight), or
Shear (angle).
Probe Types: Single Contact, Dual, Delay, and Angle .
Units: English (in), Metric (mm), or Time (μs).
Velocity: 0.0100 to .6300 in/μs (256–16,000 m/s).
Test Range: 0 to 0.076in (1.93mm) minimum, to 1200in
(30,480mm) maximum at steel velocity. Continuously
variable.
Zero Offset (Probe Zero): 0–999.999 μs.
Material Velocity Table: Contains longitudinal and
shear velocities for a variety of material types.
Memory
Log Formats: Grid (Alpha Numeric), or Sequential (Auto
Identifier).
Capacity: 4 Gb internal & up to 64 Gb External SD slot.
Screen Capture: bitmap graphic capture for quick
documentation.
Custom Setups: 64 user configurations.
Video
Remote Commander: Java PC software allows remote
display and control for training/presentation purposes,
and custom system integration.
Flaw Detector Features
TRIG: Trigonometric display of beam path, depth,
surface distance, and curved surface correction. Used
with angle beam transducers.
DAC: Up to 8 poi